safholland Chinese
Mechanical Suspensions
Air Suspensions
Landing Gears
New Products
Developing total suspension and axle solutions for the semi-trailer and road tanker industry
Latest Range
Superior Quality
Widest Choice
Customisation Available
Competitive Price
YORK policy is one of continuous development.
We therefore reserve the right to amend specifications without notice or obligation.

Terms & Conditions.
Shock Absorber
  Heavy duty shock absorbers incorporating high damping characteristics helps eliminate wheel hop.

Fully contained within the suspension, mounted between the front hanger and the spring seat they are protected from road damage. This also allows for a more compact design giving a shorter stroke which reduces heat and increases service life. For most applications the shock absorber can also act as a check strap.
Pivot Bush
  The exceptionally tough, metal encased Pivot Bush chosen for its very compact design, virtually eliminates rubber extrusion thus greatly extending its effective working life. The bonding of the bush material to the outer case and inner sleeve ensures the bush works in shear and cannot rotate. This compact design also permits front bracket reinforcing to be closer to the point of side load and reduces unwanted side movements.
  The shape of the spring contains the suspension geometry. Tecair I has a standard rating of 12 tonne which is specially designed for arduous applications.
Air Spring
  Using quality large diameter, low pressure air springs allow a reduction of the required air pressure at typical axle loads. A 4 bar system fed from a 6 bar air reservoir more readily maintains the correct ride height and trailer stability. With the air spring including an internal bump stop, a long service life is expected.
Axle Seat
  The design philosophy of the axle seat for Tecair I is allowing for ease of fitment of the shocker during servicing.
  The axle, which serves as a torsion beam, is manufactured from 127mm diameter seamless manganese alloy steel, its high strength and resistance to bending characteristics are a critical part of the design of Tecair air suspensions.
- 16mm wall thickness suitable for highway operations.
- 19mm wall thickness suitable for off-road operations.
 Download Product Brochures
Tecair1Tecair2Tecair ZDuratracRecair FB VRHAxle Lift
Tecair 2
Air Suspension Modules 9- 10 ton Capacity
Technical Specification
Capacity 9 Tonnes Per Module
Standard Spring Center 960mm @ 1,850mm Axle Track Length
Standard Airbag Center 818mm @ 1,850mm Axle Track Length
Tare Weights (Approx) 162Kg per Module complete
Underslung 5" Round Beam

Underslung Ride Height (mm) Model Number (w/o lift) Model Number (w bolt lift)
235 TA2-09U235RS TA2-09U235RS00E1
260 TA2-09U260RD TA2-09U260RD00E1
285 TA2-09U285RD
310 TA2-09U310RS TA2-09U310RS00E1
335 TA2-09U335RS TA2-09U335RS00E1
360 TA2-09U360RS TA2-09U360RS00E1
Overslung 5" Round Beam

Underslung Ride Height (mm) Model Number (w/o lift) Model Number (w bolt lift)
420 TA2-09V420RS TA2-09V420RS00E1
445 TA2-09V445RS TA2-09V445RS00E1
470 TA2-09V470RS TA2-09V470RS00E1
495 TA2-09V495RS TA2-09V495RS00E1
520 TA2-09V520RS TA2-09V520RS00E1
545 TA2-09V545RS TA2-09V545RS00E1
600 TA2-09V600RS TA2-09V600RS00E1
Underslung 6" Square Beam

Underslung Ride Height (mm) Model Number (w/o lift) Model Number (w bolt lift)
205 TA2-09U205SS TA2-09U205SS00E1
230 TA2-09U230SS TA2-09U230SS00E1
225 TA2-09U225SS TA2-09U225SS00E1
280 TA2-09U280SS TA2-09U280SS00E1
305 TA2-09U305SS TA2-09U305SS00E1
330 TA2-09U330SS TA2-09U330SS00E1
Overslung 6" Square Beam

Underslung Ride Height (mm) Model Number (w/o lift) Model Number (w bolt lift)
425 TA2-09V425SS TA2-09V425SS00E1
450 TA2-09V450SS TA2-09V450SS00E1
475 TA2-09V475SS TA2-09V475SS00E1
500 TA2-09V500SS TA2-09V500SS00E1
525 TA2-09V525SS TA2-09V525SS00E1
550 TA2-09V550SS TA2-09V550SS00E1
600 TA2-09V600SS TA2-09V600SS00E1
Tec Air 1 & 2 Approved ADR No's
Single Axles 8163SS
Tandem Axle 8164SS
Tri-Axle 8162SS
back to top
Copyright © 2008 York Transport Equipment (Asia) Pte Ltd. All rights reserved.