safholland Chinese
Applications
 
 
PRODUCTS & APPLICATIONS
Products
 
Axles
Mechanical Suspensions
Air Suspensions
Couplers
Landing Gears
Accessories
Others
Applications
Solutions
New Products
 
 
Developing total suspension and axle solutions for the semi-trailer and road tanker industry
 
Latest Range
Superior Quality
Widest Choice
Customisation Available
Competitive Price
 
YORK policy is one of continuous development.
We therefore reserve the right to amend specifications without notice or obligation.

Terms & Conditions.
 
 
  Introduction  
 
Shock Absorber
  Heavy duty shock absorbers incorporating high damping characteristics helps eliminate wheel hop.

Fully contained within the suspension, mounted between the front hanger and the spring seat they are protected from road damage. This also allows for a more compact design giving a shorter stroke which reduces heat and increases service life. For most applications the shock absorber can also act as a check strap.
 
Pivot Bush
  The exceptionally tough, metal encased Pivot Bush chosen for its very compact design, virtually eliminates rubber extrusion thus greatly extending its effective working life. The bonding of the bush material to the outer case and inner sleeve ensures the bush works in shear and cannot rotate. This compact design also permits front bracket reinforcing to be closer to the point of side load and reduces unwanted side movements.
Spring
  The shape of the spring contains the suspension geometry. Tecair I has a standard rating of 12 tonne which is specially designed for arduous applications.
Air Spring
  Using quality large diameter, low pressure air springs allow a reduction of the required air pressure at typical axle loads. A 4 bar system fed from a 6 bar air reservoir more readily maintains the correct ride height and trailer stability. With the air spring including an internal bump stop, a long service life is expected.
Axle Seat
  The design philosophy of the axle seat for Tecair I is allowing for ease of fitment of the shocker during servicing.
Axle
  The axle, which serves as a torsion beam, is manufactured from 127mm diameter seamless manganese alloy steel, its high strength and resistance to bending characteristics are a critical part of the design of Tecair air suspensions.
- 16mm wall thickness suitable for highway operations.
- 19mm wall thickness suitable for off-road operations.
 Download Product Brochures
 
 
 
     
Tecair1Tecair2Tecair ZDuratracRecair FB VRHAxle Lift
 
 
Tecair FB VRH
 
Overslung Suspension



Part No Model Description
63630045 FB VRH 360S KIT OVERSLUNG SEALED A/BAG
63630046 FB VRH 405S KIT OVERSLUNG SEALED A/BAG
63630047 FB VRH 450S KIT OVERSLUNG SEALED A/BAG
63630086 FB VRH 320S KIT OVERSLUNG SEALED A/BAG
63630113 FB VRH 420S KIT OVERSLUNG SEALED A/BAG

Notes:

  1. Tare Weight (Without Lift) - Approximate 130 kg depending on ride height
 
Underslung Suspension



Part No Model Description
63630108 FB VRH 100S KIT UNDERSLUNG SEALED A/BAG
63630042 FB VRH 190S KIT UNDERSLUNG SEALED A/BAG
63630043 FB VRH 235S KIT UNDERSLUNG SEALED A/BAG
63630044 FB VRH 280S KIT UNDERSLUNG SEALED A/BAG
63630112 FB VRH 330S KIT UNDERSLUNG SEALED A/BAG

Notes:

  1. Tare Weight (Without Lift) - Approximate 140 kg depending on ride height
 
Underslung Suspension - Disc Brake Axles





Part No Model Description
63630107 FB VRH 235S KIT U/SLUNG S/BAG AXLE 2980 (Pan19-1 disc brake)
63630109 FB VRH 280S KIT U/SLUNG S/BAG AXLE 2980 (Pan19-1 disc brake)

Notes:

  1. Tare Weight (Without Lift) - Approximate 125 kg depending on ride height
 
Tecair FB VRH ADR Approval No's.
  Std. Opt.
Single Axles 821955 816355
Tandem Axle 822055 816455
Tri-Axle 822155 816355
 
back to top
 
 
 
   
 
Copyright © 2008 York Transport Equipment (Asia) Pte Ltd. All rights reserved.